restaurants in de pijp area of amsterdam 3.6 Compensation

vervangen hittepomp bosch vaatwasser

gas today in manipur If the right choice of material and geometry and the proper application of conditioning techniques do not lead to the desired system performance, the last step is to apply compensation techniques.

mooie duitse plaatsen If it is possible to identify the dominant thermal deformation, it may be possible to compensate for this deformation in the controls (software) of the machine. This is illustrated in Figure 10.A henry siahaan instagram [Pierse, 2006], where a machine tool is shown. When machining a work piece, hot chips and cooling fluids are washing down on the machine base; causing it to deform (bending). This deformation leads to an error (displacement) between cutting tool and work piece. Temperature sensors are placed at the bottom and top of the machine base. The thermal deformation of the machine base can be predicted by determining the relation (sensitivity S) between the measured temperatures (Ttop and Tbottom) and the thermal deformation d.

gezin behaard gezicht

brief uit de eerste wereldoorlog  

concert agenda jannes  

Name Symbol Units Description
Distance d m Thermal deformation
Sensitivity S m/K  
Temperature 1 Ttop K Temperature upper sensor
Temperature 2 Tbottom K Temperature lower sensor

concerto meaning in hindi  

pepernoten bakken albert heijn  

ophalen bezorgen meubels

netwerk ziggo mobiel  

jouw lijf is super geweldig thuis bij uitgeest Figure 10.A: Simple thermal compensation

meest trouwe hondenras drs ntjm van de voort het nieuwe lyceum Figure 10.B: Thermal compensation with a grid of temperature sensors

hoog laag kinderbed  

kopie brabants dagblad The sensitivity can be determined analytically (modelling) or empirically (measuring). By applying a software correction the control system of the machine tool, based on this relation and the measured temperatures, the thermal induced deformation can be compensated.
It is not always easy to determine the dominant thermal disturbance or deformation in a machine tool. In many cases, more dominant heat sources are present which influence the thermal stability, such as the drive systems and the environment. In that case, a grid of temperature sensors can be placed on the machine base, as illustrated in Figure 10.B. The relation between the measured temperatures and the thermal deformation of a certain point of interest, for instance between the cutting tool and the work piece, can be expressed in matrix form as:

hemel volkswagen plaatsen

goo url shortener The determination of the sensitivity vector can be done by placing in turn a local heat source on each temperature sensor location. In that case, n different temperature distributions and n different deformations (at the point of interest) are measured. The sensitivity vector can be determined by the relation:

juiste grip met dumbells

verhouding hypotheek salaris  

graven koninklijk huis Also in this case, the sensitivity vector can be determined analytically, empirically, or both. The number of temperature sensors can be reduced by removing those sensors with the smallest sensitivity steden met een n [Ruijl, 2001].

sai image editor  

engeland devon dartington Compensation techniques are more and more applied in precision machines, especially in machine tools and measuring machines. The previous mentioned techniques are some simple examples. More advanced techniques are being developed, such as thermal system identification (e.g. thermal mode shapes). These techniques and the technique above are explained in more detail in robert stolz belangrijkste werk [Koevoets, 2007].

poes getekend makkelijk van de zijkand